Training course "CENTRAL PROCESSING PLATFORM OVERVIEW AND DESIGN"

Training Course

CENTRAL PROCESSING PLATFORM

OVERVIEW AND DESIGN

  • Duration: 04 days
  • Tentative training date: from 21st to 24th May 2018
  • Lead Instructor: PhD. LE BA HUNG
  • Training Fee: 21.500.000 VND/Pax/04 days (This training fee includes training room, training equipment, lunch and tea-break for participants, certificates and etc.)
  • Training Content:
Time

Content

Day 1

1. Overview of Central Processing Platform

-       Topside facilities

-       Conceptual development for CPP: study guideline for selection of CPP configuration

-       Hysys simulation practical guideline (for typical CPP)

Day 2

2. Production/inlet separation System

-       Basis/objective and Operation principle of the system

-       Types of separation vessel, separator selection

-       03 phases (Oil, gas and water) vessel sizing

Day 3

3. Compression System

-       Types of compressor

-       Evaluation and selection of compressor type

-       Compressor Sizing

-       Settle out calculation

-       PFD/P&ID Development

-       Anti-surge and hot bypass

-       Process Control and Operation for Centrifugal Compressor

-       Process Control and Operation for Reciprocating Compressor

Day 4

4. Relief and Blowdown on CPP

-       Relief load analysis

-       Relief calculation

-       Blowdown analysis

-       Blowdown calculation

-       Flare system sizing

 

If you are interested, please contact to Ms. Bạch Nhạn at email: This email address is being protected from spambots. You need JavaScript enabled to view it. or contact: Tel: +84 28 3636 0721 | Fax: +84 28 3636 0981.